Green Flames

FlameFX Fuel Additives Instructions & Advisory
 
Flame FX Colored flame turns one liter of Denatured alcohol into a vibrant and colorfully burning fuel!
 
Fill a 32oz mason jar (Glass or HDPE Containers Only) with denatured alcohol. Add the packet of powder to the fuel; be sure to mix the fuel thoroughly until the powder dissolves entirely and let sit for at least 30 minutes. For the fastest results make sure the fuel is at least room temperature. 
 
Whenever handling the powder or the fuel it is advisable to wear gloves and a filtered mask. Fuel and powder are considered to be moderately toxic. Contact with or inhalation can be mildly dangerous and cause irritation. 
 
When spinning using colored flame additives always do so outdoors or in otherwise very well ventilated areas. N99 rated chemical masks are highly recommended as well as maintaining a reasonable distance from the audience.
 
We will be offering customized, stylish N99 pm 2.5 chemical masks on our website later this year. 
 
As with the use of any fuel additive, our Colored Flame solution can leave a sticky residue on your wicks after each use. 
 
To maintain your wicks; we suggest burning off excess residue with regular white gas as well as soaking in 99% isopropyl alcohol and gently scrubbing your wicks with a brush. 
 
If you have any questions or comments feel free to email us @ info@flamefx.net or shoot us a message via Facebook. 
 
Above all else, Have Fun, Don't Die & Safety Third!